CYBEX Onyx Bedienungsanleitung PDF herunterladen (Seite 7)

11

English

10

Changing Harness Height

This stroller features three Shoulder Harness

Positions for the safety and comfort of your

child.

ALWAYS USE a harness position located

ABOVE the child’s shoulders. If all harness

positions are above the child’s shoulders,

use the one closest to the shoulders.

1. Begin by pulling the Adjustment Strap snug.

2. At the back of the stroller, and under the

lower part of the seat cover, locate the

metal Splitter Plate

that holds both of the

Shoulder Straps and unhook both straps.

3. From the front of the stroller, pull the

Shoulder Straps out completely.

Rethread

each strap through the desired slots.

4. By reaching through the opening for the

backrest recline, nd the end of the Harness

Straps and then feed them through the

harness slots in the backrest mechanism.

5. Connect the straps to the Splitter Plate.

There is only one set of strap holes in the

backrest mechanism.

6. Test that the harness works properly

by pushing down on the Harness

Release Button while pulling the

harness out through the new shoulder

position and then tighten by pulling

on the One-hand Adjustment Strap.

For Newborns

Use the lower Harness Positions (if they are

even with or just above your child’s shoulders)

and the upper strap loops

for the Splitter Plate.

For a Larger Baby

Use middle or upper Harness Positions and the

end strap loops for the Splitter Plate.

Adjusting the HarnessAdjusting the Harness

1 2 3 4 5 6 7 8 9 10 11 12 ... 28 29

Kommentare zu diesen Handbüchern

Keine Kommentare