Cybex 525AT Arc Trainer Bedienungsanleitung PDF herunterladen (Seite 64)

64 65

Cybex Service Manual

Test the unit for proper operation

1. Plug the power cord into the power outlet.

2. Turn the main power switch to the on (I) position.

3. Operate the unit at all levels to verify proper operation.

MCC Board

Tools Required

• Phillips screwdriver

• ESD (Electrostatic Discharge) grounding strap

Disconnect power source

4. Turn the main power switch to the off (O) position.

5. Unplug the power cord from the power outlet.

WARNING: Shock and electrocution hazard

• Unplug unit and let sit 10 minutes before cleaning or performing maintenance

• Electrical charge can remain in unit after unplugging

• Keep water and liquids away from electrical parts

NOTICE: Console damage

Wear an ESD grounding strap during this procedure. Connect ESD grounding strap to

frame bolts or unpainted metal of frame. If ESD grounding strap is not available, touch

frame bolts or unpainted metal of frame before handling any electronics.

Remove front cover

1. Remove the four short screws and one long screw securing the front cover and iPad clip to the

console assembly using a Phillips screwdriver.

Description

1 Console assembly

2 Short screws (4)

3 iPad clip

4 Long screw (1)

2. Tilt front cover forward.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 73 74

Keine Kommentare

Cybex 525AT Arc Trainer Bedienungsanleitung Seite 64