CYBEX LCX-425T Bedienungshandbuch PDF herunterladen (Seite 18)

Cybex 425T Treadmill Owner’s Manual

Assembly

and Setup

2-2

Electrical Power Requirements

The power requirements for this treadmill are a grounded, dedicated circuit, rated for one of the following:

115 VAC ±5%, 60 Hz and 15 amps; 208/220 VAC, 60 Hz, 100 amps or 230 VAC ±5%, 50 Hz and 10

amps. Contact your electrician to ensure the power supply complies with local building codes.

Do not use a ground plug adapter to adapt the 3-prong power cord plug to a non-grounded electrical

outlet. Do not use an extension cord.

Assembling the Treadmill

WARNING: Use extreme caution when assembling the treadmill. Failure to do so could result in

injury.

CAUTION: A minimum of two people are required to assemble this treadmill.

Tools Required

• 9/16” Socket wrench with a 4” extension

• Phillips screwdriver

NOTE: The words “left” and “right” denote the treadmill user’s orientation.

1. Read and understand all instructions thoroughly before assembling the treadmill.

NOTE: Each step number in the assembly instructions tells you what you will be doing. The lettered

steps following each step number describe the procedure required. Do not continue with step 2

until you have carefully read all of the assembly instructions.

2. Verify you have received the correct package.

Read the sticker on the outside of the box and verify that the model number, color and voltage are A.

what you ordered. NOTE: During step 3 and 5 you will verify that the contents of the box match

the sticker.

3. Unpack and verify the contents of the boxes.

Lift up and remove the cardboard sleeve that surrounds the treadmill. A.

Check to be sure that the following items are present. Check off ( B. ) each item as you ﬁ nd it. See

Figure 1. If any of the parts are missing contact Cybex Customer Service.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 83 84

Keine Kommentare

CYBEX LCX-425T Bedienungshandbuch Seite 18