Cybex 525AT Arc Trainer Bedienungsanleitung PDF herunterladen (Seite 37)

Cybex Service Manual

3. Verify that both pulleys are aligned properly using a straight edge. The straight edge must be

no more than 1/16” from pulley edge.

Description

1 Pulley

2 The straight edge must be no

more than 1/16” from pulley

edge

3 Touch straight edge here (two

places)

4 Pulley

5 Speed sensor

6 Straight edge

7 The straight edge must be no

more than 1/16” from pulley

edge

8 Touch straight edge here

Install counter weights

1. Apply loctite to threads of FHSCS and inside the counter weight hole (where the FHSCS will

be tightened into).

Description

1 FHSCS (2) torque to 250 lbs in

2 Counter weight (2)

3 Loctite (2)

4 Pulley and crank shaft assembly

5 Top edge of counter weight needs

to be perpendicular to slot on

crank shaft

2. Attach both counter weights to new pulley and crank shaft assembly and attach FHSCS. Top

edge of counter weight needs to be perpendicular to slot on crank shaft.

3. Securely tighten the two FHSCS using a 7/32” Allen wrench. FHSCS to be torqued to

250 lbs-in.

Install crank shaft assembly

The new bearings have been pre-assembled on the new crank shaft assembly and are not

adjustable.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 73 74

Keine Kommentare

Cybex 525AT Arc Trainer Bedienungsanleitung Seite 37